Regency Freestanding Woodstove
9
INSTALLATION
Diagram 4
Diagram 2
Diagram 3
Minimum Overall Depth (Y) of Floor Protector
Residential
Residential Mobile Home
Alcove
Unit "C" Vent
Close Clearance Close Clearance
Y
Z
Y
Z
Y
Z
Y
Z
Medium F2402M
with Airmate
46" (1168 mm)
6" (152 mm) 45"* (1143 mm) 5" (127 mm)
45" (1143 mm) 5" (127 mm)
45"* (1143) 5" (127 mm)
with Rear Defl ector
46" (1168
mm)
6" (152 mm) 45" (1143
mm) 5" (127 mm)
45" (1143 mm) 5"
(127 mm)
45" (1143) 5" (127
mm)
*The rear clearance to combustibles is less
than 6", for corner installations the rear corners
may be angled to take advantage of the closer
clearances.
STOVE ASSEMBLY
PRIOR TO
INSTALLATION
All units require either the pedestal or 4 legs at-
tached to the base. The F2402M stove requires
either the Airmate or Rear Heat De
fl
ector on top
of the stove. Clearances to combustible materials
vary depending on whether the airmate or rear
heat de
fl
ector is installed, so be sure to check
the clearance information on pages 7 and 8.
Airmate Assembly
1)
The airmate sits on top of the stove with
the slots in the sides
fi
tting over the curved
de
fl
ector on the rear stove top. See diagram
1. Discard the Rear Heat De
fl
ector that is
supplied with the unit, it is not required if the
airmate is installed.
2)
Center the airmate and push it forward to the
front of the stove. The back of the airmate
should be level with the back and sides of
the rear heat shield. See diagrams 2 & 3.
Rear Heat Defl ector
Assembly
The rear heat de
fl
ector is supplied with the stove
and must be installed unless
the optional airmate has
been selected. It
stops the heat radi-
ated from the
fl
ue
collar from over-
heating the rear
wall. The rear heat de
fl
ector is installed on top
of the rear heat shield, as shown in diagram 4.
Pedestal Assembly
Side Shield
Diagram 1
