20
Regency Plateau™ Series Outdoor Gas Fireplace
INSTALLATION
TABLE TOP INSTALLATION - COFFEE TABLE UNIT
End Caps
Before installation,stainless steel must be handled and cleaned as per instructions noted below:
Stainless Steel Table Top
6WDLQOHVVWDEOHWRSPXVWEHLQVSHFWHGIRUVFUDWFKHVDQGGLPSOHVSULRUWRLQVWDOODWLRQ$OOFODLPVWREHUHFRUGHGDWWKLVWLPH
&ODLPVIRUGDPDJHDIWHULQVWDOODWLRQZLOOQRWUHFHLYHFRQVLGHUDWLRQ
7RSURWHFWWKH¿QLVKGXULQJLQVWDOODWLRQDQGKDQGOLQJ
FRWWRQJORYHV
MUST
EHZRUQDWDOOWLPHVZKLOHKDQGOLQJWKHSDQHOVHYHQZKHQ
UHPRYLQJSURWHFWLYHFRDWLQJ
6WDLQOHVVWDEOHWRSZLOOGLVFRORUDOLWWOHGXULQJQRUPDORSHUDWLRQ
7KLVLVQRUPDODQGVKRXOGQRWEHFRQVLGHUHGDGHIHFW
*
$OOKDQGDQG¿QJHUPDUNV
MUST
EHFOHDQHGRIIZLWKDVRIWFORWKDQGDVWDLQOHVVVWHHOFOHDQHU0RVWVWDLQOHVVVWHHOFOHDQHUVOHDYHD¿OP
UHVLGXHRQWKHVXUIDFHRIWKHSDQHOV8VHDQDPPRQLDEDVHGFOHDQHULHJODVVFOHDQHUWRUHPRYHWKLV¿OPEHIRUHDSSO\LQJKHDWWRWKHXQLW
Failure to do this will result in burn stains on table top which you will be unable to remove.
1RWSURWHFWHGE\SURGXFWZDUUDQW\
NOTE
: These instructions apply to both the stainless steel and sunset
bronze table tops.
NOTE
: Coffee table unit shown below, instructions also apply to built-in
burner.
Two brackets need to be installed before installing the Table Top.
1)
Remove end panel by pulling off.
7)
Place end caps over pilot and opposite end to com-
plete installation.
8)
To remove - reverse steps 7-5.
5)
Place Table Top
on Unit.
6)
Secure table to unit from underside, with 4 screws
in locations shown below.
Final Install
2)
Install Table Top bracket with 3
screws to unit as shown below.
3)
Replace side panel.
4)
Repeat Step 1 and 2 on other side.
