Regency Plateau™ Series Outdoor Gas Fireplace
13
INSTALLATION
1)
Remove end panel (end with the ON/OFF switch). Panels are held in place
by magnets. Place panel on a soft clean surface.
2)
Remove long side panel (left panel if you are facing end with ON/OFF
switch) to access the 3/8" fi tting to the gas control.
3)
Connect gas line..
GAS CONNECTION
4)
Check all gas connections (both valve train & propane tank or NG
source) under normal operating pressure, for leaks, with soapy water.
NOTE:
If soap bubbles, this would indicate a gas leak.
5)
Reverse steps 1 & 2.
Gas connection
@ unit
NOTE:
a)
WARNING: Cylinder compartment must be kept separate from com-
bustion chamber - Reference to AS/NZS 5601.1.
b)
Remote cylinder compartment installation, materials, ventilation and
securing of pipe work (fi xed and fl exible ) must comply with AS/NZS
5601.1.
c)
Refer to AS/NZS 5601.1 for fl ex hoses.
d)
Refer to AS4631 for fl exibility connectors.
e)
AS 4617 for manual shut off valves.
f)
WARNING:
Cylinder must not be stored OR placed in an area that
does not comply to AS/NZS 5601.1
g)
The installation and use of approved mechanical isolation valves is
required.
