manualshive.com logo in svg

Regency P33E-4, Owners & Installation Manual

The Regency P33E-4 Owners & Installation Manual is a comprehensive and essential guide for owners of this sleek and efficient fireplace. Available for free download, this manual provides step-by-step instructions and helpful tips to ensure a seamless installation and optimal performance. Get your copy exclusively at manualshive.com.

Share
Download
background image

Regency® P33E-4 Zero Clearance Direct Vent Gas Fireplace

5

SAFETY LABEL

SAFETY LABEL

This is a copy of the label that accompanies 
each P33E-4 Zero Clearance Direct Vent Gas 
Fireplace. We have printed a copy of the contents 
here for your review. The safety label is located 
on the front inside base of the unit, visible when 
the bottom louver is open.

NOTE:

 Regency

®

 units are constantly being 

improved. Check the label on the unit and if 
there is a difference, the label on the unit is the 
correct one.

DO NOT REMOVE THIS LABEL / NE PAS ENLEVER CETTE ÉTIQUETTE

358

Minimum supply pressure
Manifold pressure high
Manifold pressure low
Orifice size
Minimum input
Maximum input
Altitude

NATURAL GAS:

Model P33E-NG4

PROPANE:

Model P33E-LP4

Minimum supply pressure
Manifold pressure high
Manifold pressure low
Orifice size
Minimum input
Maximum input
Altitude

FPI Fireplace Products International Ltd.

Delta, BC, Canada

Serial No./ No de serie

918-848

5"

WC

(1.25 kPa)

3.5"

WC

(0.87 kPa)

1.6"

WC

(0.39 kPa)

# 44

DMS

0-4500 ft/pi

(0-1372 m)

14,000 Btu/h (4.10 kW)
20,000 Btu/h (5.86 kW)

APPAREIL FONCTIONNANT AU NATURAL GAS
CONCU POUR ETRE POELE:

Pression d'allimentation minimum
Pression a la tubulure d' chappement lev e
Pression a la tubulure d' chappement basse
Grandeur de l'injecteur
D bit Califorique minimum selon
D bit Caliorfique maximum selon
l'altitude

Modéle P33E-NG4

é

é

é

é

é
é

APPAREIL FONCTIONNANT AU PROPANE
CONCU POUR ETRE POELE:

Pression d'allimentation minimum
Pression a la tubulure d' chappement lev e
Pression a la tubulure d' chappement basse
Grandeur de l'injecteur
D bit Califorique minimum selon
D bit Caliorfique maximum selon
l'altitude

Modéle P33E-LP4

é

é

é

é

é
é

MAY BE INSTALLED IN MANUFACTURED (MOBILE) HOMES AFTER FIRST SALE

.

Listed:
Certified for/Certifi e pour:
Tested to:
WN# 16509

VENTED GAS FIREPLACE HEATER

CANADA and U.S.A.

é

CAN/CGA-2.17-M91, ANSI Z21.88-2009/CSA 2.33-2009

Model/Modele:

P33E-NG4

Model/Modele:

P33E-LP4

Made in Canada / Fabrique au Canada

11"

WC

(2.73 kPa)

10"

WC

(2.49 kPa)

6.4"

WC

(1.59 kPa)

# 54

DMS

0-4500 ft/pi

(0-1372 m)

16,500 Btu/h (4.83 kW)
20,000 Btu/h (5.86 kW)

This appliance must be installed in accordance with local codes, if any; if none, follow the National Fuel Gas Code, ANSI Z223.1, or Natural Gas and Propane Installation Code, CSA B149.1.
This appliance must be installed in accordance with the Standard CAN/CSA Z240 MH, Mobile Housing, in Canada, or with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280, in the
United States, or when such a standard is not applicable, ANSI/NCSBCS A225.1/NFPA 501A, Manufactured Home Installations Standard or ANSI A119.2 ou NFPA 501C Standard for Recreational Vehicles
This appliance is only for use with the type of gas indicated on the rating plate and may be installed in an aftermarket, permanently located, manufactured (mobile) home where not prohibited by local codes. See
owner's manual for details.
Installer l'appareil selon les codes ou règlements locaux, ou, en l'absence de tels règlements, selon les codes d'installation ANSI Z223.1, National Fuel Gas Code ou CSA-B149.1 en vigueur.
Installer l'appareil selon la norme CAN/CSA-Z240, Série MM, Maison mobiles ou CAN/CSA-Z240 VC, Véhicules de camping, ou la norme 24 CFR Part 3280, Manufactured Home Construction and Safety Standard.
Si ces normes ne sont pas pertinentes, utilisez la norme ANSI/NCSBCS A225.1/NFPA 501A, Manufactured Home Installations Standard, ou ANSI A119.2 ou NFPA 501C Standard for Recreational Vehicles.

For use with glass doors certified with the appliance only

This vented gas fireplace heater is not for use with air filters.

Ne pas utiliser de filtre à air avec ce foyer au gaz à évacuation.

Fan (Part # 432-917) LP conversion kit # 434-972

Electrical supply / Électrique 115VAC, 1.13 A, 60Hz.

Cet appareil doit être utilize uniquement avec le type de gaz indiqué sur la plaque signalétique. Cet appareil peut être installé dans une maison préfabriquée ou mobile (É.-U. seulement) installée à demeure si les
règlements locaux le permettent. Voir la notice de l'utilisateur pour plus de renseignements. Cet appareil ne peut pas être utilisé avec d'autres gaz sauf si une trousse de conversion certifiée est fournie.

Pour utilisation uniquement avec les portes en verre certifiées avec l'appareil

VENTED GAS FIREPLACE HEATER - NOT FOR USE WITH SOLID FUELS.

NE PAS UTILISER AVEC DUCOMBUSTIBLE SOLIDE.

FOYER AU GAZ À ÉVACUATION -

Model P33E-NG4 convertible to 17,500 Btu for Altitude 0- 4500ft/pi
Orifice size
Maximum input
Minimum input

# 47

DMS

17,500 Btu/h

(5.13 kW)

9,800

Btu/h

(2.87 kW)

Grandeur de l'injecteur
D bit Caliorfique maximum selon
D bit Califorique minimum selon

é
é

(For use with Faceplate)

Model P33E-LP4 convertible to 17,500 Btu for Altitude 0- 4500ft/pi
Orifice size
Maximum input
Minimum input

Minimum Clearances to Combustibles

Degagement Minimum De Materiaux Combustibles

0" Clearance to
combustibles from:

Mantel Clearances from Top:

Side Wall Clearance from Side
Facing

Top, sides, bottom and rear of unit

A) Min. 7" (177mm)

B) 7.5"(191mm)

C) Min 1” (26mm) w/Faceplate

Min 0” (0mm)

All Other Applications

with Flush or Bay Front

Clearance to finished floor from
Base:

Max. Depth 36" (914mm)
Min. Width 48" (1219mm),
Min. Height 59“ (1499mm)

Alcove Clearances for Bay &
Flush Louvers:

B

B

30"

Ceiling

W

all

A

Minimum clearance of Vent
Terminal to Outside Corner &
Inside Corner: 6"/150mm

Horizontal Terminations require
the use of the
(Part # 946-523)

AstroCap

TM

A

B

C

B

# 56DMS
15,500Btu/h

(4.54 kW)

9,000Btu/h (2.64 kW)

The "Bay Louvers"

be

used with the Bay Glass option

MUST

DOOR SEAL: Please check that

the door is properly sealed

Grandeur de l'injecteur
D bit Caliorfique maximum selon
D bit Califorique minimum selon

é
é

(For use with Faceplate)

For the State of Massachusetts, installation 
and repair must be done by a plumber or 
gasfi tter licensed in the Commonwealth of 
Massachusetts.

For the State of Massachusetts, fl exible 
connectors shall not exceed 36 inches in 
length.

For the State of Massachusetts, the appli-
ances individual manual shut-off must be a 
t-handle type valve.

The State of Massachusetts requires the 
installation of a carbon monoxide alarm in 
accordance with NFPA 720 and a CO alarm 
with battery back up in the same room where 
the gas appliance is installed.

Summary of Contents for P33E-4





































































Reviews:

No comments

Related manuals for P33E-4

Wayne P250 series User Manual preview
P250 series
Brand: Wayne Pages: 46
Wayne EHG Manual preview
EHG
Brand: Wayne Pages: 52
Living Fire Paul Agnew Designs ilektro Series Quick Start Manual preview
Paul Agnew Designs ilektro Series
Brand: Living Fire Pages: 4
Firegear BCOL-18NG Installation Instructions Manual preview
BCOL-18NG
Brand: Firegear Pages: 10
GRAND EFFECTS LIAUT24xxIM Operation And Maintenance Manual preview
LIAUT24xxIM
Brand: GRAND EFFECTS Pages: 28
Amantii WM-50 Installation And Operating Instructions Manual preview
WM-50
Brand: Amantii Pages: 11
Bioprom H-0220 Operation Manual preview
H-0220
Brand: Bioprom Pages: 14
Livoo DOC286 Instruction Manual preview
DOC286
Brand: Livoo Pages: 6
Canvas WALDON CTCFP60-5 Assembly Instructions Manual preview
WALDON CTCFP60-5
Brand: Canvas Pages: 100
Napoleon CLEARion Elite Installation And Operation Manual preview
CLEARion Elite
Brand: Napoleon Pages: 120
Hargrove AKRG5/8CPCLP Installation And Operation Manual preview
AKRG5/8CPCLP
Brand: Hargrove Pages: 7
Pacific energy Brentwood Gas Insert Installation And Operating Instructions Manual preview
Brentwood Gas Insert
Brand: Pacific energy Pages: 24
Heat & Glo 350TSI-P-CEM Owner'S Manual Installation And Operation preview
350TSI-P-CEM
Brand: Heat & Glo Pages: 71
Superior Fireplaces WRT4826 Installation And Operation Instructions Manual preview
WRT4826
Brand: Superior Fireplaces Pages: 32
Monessen Hearth ACUF32-BD Installation Manual preview
ACUF32-BD
Brand: Monessen Hearth Pages: 24
eligent EF450SL Instruction Manual preview
EF450SL
Brand: eligent Pages: 4
Stellar Hearth 4-SS-2-GL Installation And Operating Manual preview
4-SS-2-GL
Brand: Stellar Hearth Pages: 37
Monessen Hearth VWF18 Installation And Operating Instructions Manual preview
VWF18
Brand: Monessen Hearth Pages: 32

Brands by name

Popular brands

Load more brands