manualshive.com logo in svg

Regency liberty LRI3E, Owners & Installation Manual

The Regency Liberty LRI3E brings elegance and warmth to your living space. Ensure a seamless installation with the comprehensive Owners & Installation Manual, available for free download from manualshive.com. This detailed manual is the perfect resource to effortlessly set up and enjoy your Regency Liberty LRI3E.

Share
Download
background image

LRI3E / HRI3E Direct Vent Gas Insert     

|     

3

 

 

|

 

3

table of contents

LRI3E  log set installation  ...........................................24
Brick panel installation .................................................26
Painted black and enamel panel installation ................27
Glass door removal / installation..................................28
Vignette faceplate with Safety screen installation ........29
Inlay installation ...........................................................30
Backing plate installation .............................................32
Optional hearth trim installation ...................................33
Optional mantel delector installation ...........................33

Operating Instructions

Operating Instructions  ................................................34
First Fire ......................................................................34
Automatic  Convection Fan Operation .........................34
Lighting Procedure ......................................................35
Shutdown Procedure ...................................................35
Normal Operating Sounds Of  
Gas Appliances ...........................................................36
Copy Of Lighting Instruction Plate ...............................36

Maintenance

Maintenance  Instructions ...........................................37
Door Glass  ..................................................................37
Pilot Adjustment ...........................................................38
General Vent Maintenance ..........................................38
Log Replacement ........................................................38
Glass Gasket ...............................................................38
Backup battery Pack ....................................................38
Fan replacement - with remote control ........................39
Fan Control Module replacement ................................39
Valve replacement .......................................................40

Parts

LRI3E parts list ............................................................42
LRI3E Main Assembly .................................................43
HRI3E Parts list ...........................................................44
HRI3E Main assembly .................................................45
Accessories .................................................................46

Warranty

 

Warranty ......................................................................48

Dimensions 

Unit dimensions with vignette faceplate ........................4
Unit dimensions with vignette fac 
small backing plate ........................................................4
Unit dimensions with 4 sided vignette fac 
backing plate .................................................................5

Installation

Copy of Safety Label HRI3E ..........................................6
Copy of Safety Label LRI3E ..........................................7
MA Code - CO Detector ................................................8
Important Message   ......................................................9
Before You Start .............................................................9
Important Message   ......................................................9
For Your Safety ..............................................................9
Speciications ................................................................9
Gas Pressure Testing ..................................................10
Installation Into A Solid Fuel Burning Fireplace  
Or Factory Built Fireplace ............................................10
Factory-Built (Metal) Wood-Burning Fireplace  
Requirements ..............................................................10
Installation Checklist ....................................................11
Materials Required ......................................................11
Minimum Fireplace Dimensions ..................................11
Minimum Clearances to combustibles .........................12
Gas Connection  ..........................................................13
Alternate approved cap/adaptor  .................................14
Standing pilot  ..............................................................14
Vent restrictor plate Installation ...................................14
Flue / vent installation ..................................................15
Air shutter Adjustment .................................................16
High Elevation ..............................................................17
Gas Line Installation ....................................................17
Gas Pipe Pressure Testing ..........................................17
GV60 Maxitrol Valve Description .................................17
System with fan (LRI3E / HRI3E) ................................18
Conversion from NG to LP  .........................................19
Media installation .........................................................21
HRI3E optional log set installation ...............................22

Summary of Contents for liberty LRI3E

























































Reviews:

No comments

Related manuals for liberty LRI3E

Hearth Products F-0710X1 series User, Installation And Servicing Instructions preview
F-0710X1 series
Brand: Hearth Products Pages: 23
Jensen Estes 140LP Owner'S Manual preview
Estes 140LP
Brand: Jensen Pages: 48
Napoleon purview 42 Series Installation And Operation Manual preview
purview 42 Series
Brand: Napoleon Pages: 128
Amantii WM-FM-50-BG Installation And Operation Instructions Manual preview
WM-FM-50-BG
Brand: Amantii Pages: 18
UC Living Rosmore Owner'S Manual preview
Rosmore
Brand: UC Living Pages: 28
Big Lots CAL-174203A User Manual preview
CAL-174203A
Brand: Big Lots Pages: 20
GBT 810392480 Assembly Instruction Sheet preview
810392480
Brand: GBT Pages: 11
Desa Wall Mantel with Base and Trim WD26CP Assembly And Installation Instructions Manual preview
Wall Mantel with Base and Trim WD26CP
Brand: Desa Pages: 8
Vermont Castings DEF36S2 Installation Instructions & Homeowner'S Manual preview
DEF36S2
Brand: Vermont Castings Pages: 14
Quality Craft MM910-33ECN Manual preview
MM910-33ECN
Brand: Quality Craft Pages: 7
Orbegozo CM 8000 Instruction Manual preview
CM 8000
Brand: Orbegozo Pages: 43
Heat&Glo 6000GLX-IPI-R Owner'S Manual preview
6000GLX-IPI-R
Brand: Heat&Glo Pages: 66
Napoleon GD25-N Installation And Operation Instructions Manual preview
GD25-N
Brand: Napoleon Pages: 24
Napoleon BGNV42N Installation And Operation Instructions Manual preview
BGNV42N
Brand: Napoleon Pages: 16
Napoleon EFL42 Installation And Operating Instructions Manual preview
EFL42
Brand: Napoleon Pages: 40
Napoleon Haliburton GDS28N Installation And Operating Instructions Manual preview
Haliburton GDS28N
Brand: Napoleon Pages: 96
Napoleon Vittoria GD19-2 Installation And Operation Manual preview
Vittoria GD19-2
Brand: Napoleon Pages: 128
Clihome IF-1330TCL Manual preview
IF-1330TCL
Brand: Clihome Pages: 34

Brands by name

Popular brands

Load more brands