Greenfire® GF1500L-2 Gas Fireplace
| 57
maintenance
Fan Service
PRIOR TO SERVICING THE FAN, ENSURE THAT UNIT HAS COOLED
TO ROOM TEMPERATURE, ALL POWER IS DISCONNECTED AND GAS
SUPPLY IS TURNED OFF.
1
. Remove faceplate, inner frame, glass door, front trim piece and inner panels
- see instructions in this manual.
2.
Remove logs.
3.
Remove burner side panels by lifting out as shown in Diagram 1.
4.
Remove burner by removing 2 screws in locations shown below.
7.
Loosen three (3) screws to remove heat deflector shown in Diagram
5.
8.
Remove two (2) screws to remove fan shown in Diagram 6.
9.
Reverse steps to reinstall fan.
6.
Remove access panel by removing eight(8) screws in locations shown
in Diagram 4.
Diagram 3 - Log Tray screws
Diagram 5 - Heat Deflector Screws
Diagram 6 - Fan Screws
Diagram 1 - Burner Side Panels
Diagram 2 - Burner Screw Locations
5.
Remove rear log tray by removing 3 screws as shown in Diagram 3 below.
Diagram 4 - Access Panel
Diagram 2 - Burner Screws