E33 FPI Direct Vent Gas Insert
17
INSTALLATION
Each Kit contains one LPG Conversion
Kit and one DC Sparker Kit.
LPG Conversion Kit Contains:
Qty. Part
#
Description
1 904-529
5/32"
Allen
Key
1
904-641
Burner Orifi ce #50
1
918-590
Label "Converted to
LPG"
1
908-528
Red LPG Label
1 910-037
LPG
Injector
(Pilot
Orifi
ce)
1 918-485
Instruction
Sheet
DC Sparker Kit Contains:
Qty. Part
#
Description
1 820-475 Bracket
DC
Sparker
1 820-476 Bracket
DC
Sparker
1
904-153
Washer #8 External
Star
1 904-330 Nut
8-32
Hex
2
904-531
Bushing Split Plastic
0.500
in.
1
904-543
Screw 8-32 x 3/4
Pan
Head
2
904-553
Screw #8 x 1/2
Type "B", Black Oxide
1
910-073 Spark
Generator
Battery
Holder
1
910-074
Spark Generator
Switch
C/W
Wire
1
910-078 Battery
Size
AA
Energizer
En91
1
910-199 Clip
Wire
Holder
1
910-903
Wire Fan To Power
Cord, Ground 30 in.
904-781
Velcro Hook, Black
904-782 Velcro
Hook,
Black
1)
Shut off the gas supply.
2)
Remove the louvers and glass door.
3)
Remove the logs and grate (refer Log
Installation section in E33 Manual).
Ensure you slide the bottom log 03-17 off
to the right-hand side to avoid chipping.
5)
Remove burner by unscrewing the 2
screws.
6)
Pull off the pilot cap to expose the pilot
orifi ce.
7)
Unscrew the pilot orifi ce with the 5/32"
allen key and replace with the LPG pilot
orifi ce provided in the kit, then replace
pilot cap.
Burner Orifi ce Removal
8)
Remove burner orifi ce with a 1/2" wrench,
while using a 9/16" wrench to hold onto
the elbow behind the orifi ce and discard
orifi ce.
9)
Reinstall new burner orifi ce LPG stamped
#50 and tighten.
4)
Remove front base brick.
10)
Turn control knob to the “OFF” position.
11)
Remove the black protection cap by hand
from the hi/low knob (Fig.1).
12)
Insert a 5/32” or 4mm Allen wrench into
the hexagonal key-way of the screw
(Fig. 2), rotate it counter-clockwise until it
is free and extract it.
Installation of LPG
Conversion Kit:
Fig. 1
Fig.2
13) Check that the screw is clean and if
necessary remove dirt.
14) Flip the screw (Fig. 3).
Fig.3
CONVERSION KIT# 731-969 FROM NG TO LP
for E33-1 using SIT 820 NOVA Gas Valve
THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER
IF IN DOUBT DO NOT DO THIS CONVERSION !!
