background image

WARNING:  
If the information in these instructions are not followed exactly, 
a  fi re or explosion may result causing property damage, 
personal injury or loss of life. 

FOR YOUR SAFETY
Do not store or use gasoline or other fl ammable vapors and 
liquids in the vicinity of this or any other appliance.

Installation and service must be performed by a qualifi ed 
installer, service agency or the gas supplier.

FOR YOUR SAFETY
What to do if you smell gas:

Do not try to light any appliance

Do not touch any electrical switch: 
do not use any phone in your 
building.

Immediately call your gas supplier 
from a neighbour's phone. Follow 
the gas supplier's instructions.

If you  cannot reach your gas 
supplier, call the fi re department.

FPI FIREPLACE PRODUCTS INTERNATIONAL LTD.  6988 Venture St., Delta, BC  Canada, V4G 1H4

919-269

Regency Horizon

  HZ54E

Gas Fireplace

09/30/13

Owners & 

Installation Manual

www.regency-fi re.com

Tested by:

Installer: Please complete the details on the back cover 

and leave this manual with the homeowner.

Homeowner: Please keep these instructions for future reference.

MODELS: HZ54E-NG1 Natural Gas

            HZ54E-LP1  Propane

Horizon HZ54E Product Video

Summary of Contents for Horizon HZ54E-LP





































































Reviews: