42
Regency GF900C-2 Gas Fireplace
installation
1. Remove front trim piece - see instructions above.
2. Remove two (2) screws to remove to panel clips and release back panel,
lift panel up and out to remove.
4. Remove panels by sliding out.
5. Reverse steps to reinstall.
Panel Clip and Burner Tray
Screw Locations
Panel Clip
INNER PANEL REMOVAL / INSTALLATION
3. Remove two (2) screws in locations shown below to release panel clips.
4. Remove 3 screws in locations shown below to remove burner tray.
919-615
11.05.15
GF900/GF1500L
919-615
11.05.15
1
OPTIONAL FINISHING TRIM INSTALLATION
tooltip
tooltip
1. Install the optional finishing trim by lining up trim with the outside of
the fascia. Press trim inward firmly to seat onto the unit.
Note: magnets will keep the trim in place.
2. Pull trim outward–away from the unit to remove.
Finishing Trim Installed
OPTIONAL FINISHING TRIM INSTALLATION
tooltip
tooltip
1. Install the optional finishing trim by lining up trim with the outside of
the fascia. Press trim inward firmly to seat onto the unit.
Note: magnets will keep the trim in place.
2. Pull trim outward–away from the unit to remove.
Finishing Trim Installed
1
GF900/GF1500L
OPTIONAL FINISHING TRIM INSTALLATION