Regency Fireplace Products Cascades F1150, Owners & Installation Manual

Page: 31 / 48

F1150 Regency Freestanding Woodstove
|
31
maintenance
Secondary Air Tube Removal / Installation
1. Allow the stove to burn out and cool down, until cool to touch.
2. Open stove door to access secondary air tubes.
3. Grasp secondary air tube firmly with vise grips, using a hammer tap vise
grips from right to left until air tube is released from grip. Remove.
4. Remove top left and right metal retainers, followed by the fragile three piece
C-Cast Baffles, then remove the remaining 2 tubes.
Secondary Air Tubes
5. To reinstall or replace, first slide left side of tube into hole on left side air
channel. Align tab on right side air channel with notch on right hand end of
air tube. Firmly grip center of air tube with vise grips, use hammer to tap vise
grips from left to right until the tube bottoms out into the air channel on right.
Latch Adjustment
The door latch may require adjustment as the door gasket material compresses
after a few fires. Removal of the spacer washer, shown in the diagram below,
will allow the latch to be moved closer to the door frame, causing a tighter seal.
Remove and replace the nuts, washer and spacer as shown.