56
|
Regency Bellavista
®
B41XTE -11 Gas Fireplace
installation
918-863a
03/02/21
4
B41XT
18)
Place Log D on the base of the firebox in between burner grate posts
3 and 4.
19) Test fire to ensure proper lighting (make sure flame flows smoothly
from one end of the burner to the other).
If there is any flame hesitation, check that area for any blockage of
the burner ports.
Burner Grate Post 3
Burner Grate Post 4
Diagram 18 – Platinum Embers
Diagram 19
17)
Separate platinum embers and place on the front burner on and
around the lava rocks. Avoid stacking platinum embers.
Platinum embers may be placed over burner ports.
IMPORTANT:
Do not cover burner ports
with lava rocks as this will
change the flame pattern.
16)
Place the lava rocks on the burner in front of the logs as shown below.
Be careful not to overlap the lava rock and ensure the burner ports
are left exposed in front of Logs G and H as shown below.
Note:
Extra lava rocks can be placed on the vermiculite on the floor
of the firebox - see below.
D
Diagram 16
Diagram 17 – Extra Lava Rocks
