Regal 23 OBX, Owner'S Manual

Page: 118 / 282

Vessel Operation
5-9
FENDERS
Fender Usage
Fenders are normally made of a rubberized plastic and are usually fi lled
with air. Most have a fi tting like a basketball so they can be in fl ated
or de fl ated. Fenders are available in a wide range of sizes and shapes
to fi t both small and large vessels. Fenders are normally designated
in inches. They are used between piers, docks, sea walls and the boat.
They protect the top sides of the boat from rubbing against rough
objects. Most fenders have eyes of attachment which allow a line to
be inserted vertically or horizontally. This will permit the fender to be
tied off to
fi t a variety of marina, dock and tidal situations. Be sure
the fender is correct for the vessel size. It is a good idea to carry extra
fenders but half a dozen is normally an acceptable number. Remember
to store fenders on board so they can be easily accessed. Some people
incorrectly call fenders “bumpers”.
Note that optional fender clips are available for your vessel.
Fender Types
There is a variety of fender styles and types, each
selected for speci
fi ed uses. When choosing fenders,
contact a marine dealer or supply house. Explain how
you moor and use your vessel so they can recommend
the best fender type for you. We suggest the type with
a
fi ll plug so you can in fl ate them with a hand pump
like the ones used for bicycles.