34
STR 1PA, STR 2PA
-
by pressing the P pushbutton on the control unit for at least 2s activate the EA calibration until
LED ERROR (red), LED MENU (green) and LED PAR (red) come on – see also description of
the procedure in separate annex No. 74 1053 02,
-
release the adjustment pushbutton P - upon release of the P pushbutton, the calibration
process is started,
-
turn on the control signals, EA is ready for operation and responds to control inputs,
-
if any of the parameters need to be changed, proceed according to the instructions in separate
annex No. 74 1053 02.
* This applies to the standard setting of menu 9 (in the menu on the control unit) FAILURE REACTION: STOP!
3.6 Setting other parameters
If changes to some parameters would be necessary, proceed please according to the instructions
given in the separate attachment
No 74 1053 02
.
3.7 Error messages from the control unit
The EA electronics makes possible to identify some failures of EA. The failure is signalled by flickering
LED ERROR (red) on the control unit
(Fig.6)
. An error has also been indicated on the LED display. An
error is indicated on the LCD display in the local control EA version.
The list of errors and warnings compiled by the producer is presented in
table 4
(chapter 4.3).
The list of errors and warnings and the way for identifying a given error as well are presented in the
separate attachment No
74 1053 02
.
A field serviceman is only entitled to change the errors and warnings set using the programme
once the EA is connected to the PC.
Summary of Contents for Rematic STR 1PA
