Regada Rematic STR 1PA, Installation, Service And Maintenance Instructions, Page: 27 / 65

STR 1PA, STR 2PA 25
- relay READY : errors, errors or warnings, errors or no remote, errors or warnings or no remote.
- output signál (from EPV passive): 4 to 20 mA; 20 to 4 mA.
- control (regulating ): 2P, 3P, 3P/2P I2
- input control signal (N): 4 to 20 mA, 20 to 4 mA, 0 to 20 mA, 20 to 0 mA
- input I1 : DISABLED, ESD, DBL (local releasing - not valid for EA without local control), STOP
- input I2: DISABLED; ESD; DBL (local releasing - not valid for this type of the EA), 2P resp. E2P (for
control programme option 3P/2P I2, or in case of active communication through Modbus/Profibus
protocol, allows control using the binary 24V DC inputs with I2 input activated).
- FAILURE REACTION : OPEN, CLOSE, STOP, SAFE POSITION
The identical functions cannot be set on I1 & I2 inputs in addition to the OFF state (e.g., if the ESD)
function is set on I1 input, it is not possible to select the ESD function on I2 input at the same time).
Fig. 6
BUTTON MENU
SETTING BUTTON P
SETTING BUTTON C
SETTING BUTTON O
LED ERROR
LED OPEN
LED MENU
LED CLOSE
LED PAR
LED I1
LED SEL
LED I2
LED POWER
COMMUNICATION CONNECTOR