Regada MP 52 200, Installation, Service And Maintenance Instructions

Page: 5 / 22

MP 52 200 3
1.3 Guaranty Conditions and Guaranty Periods
1.3.1 Guaranty Conditions
Detailed guaranty conditions includes contract.
The guaranty period dependent:
for the territory of Slovak Republic, installation performed by a electro-technically educated
worker according to § 21, the regulation of MPSvR No.718/2002 and trained by the producer or by a
contracted service firm,
for the territory of Czech Republic, installation performed by a qualified person according to § 5,
the regulations No. 50/1978 of the Coll. trained by the producer or by a contracted service firm.
The supplier is responsible for the completeness of the delivery and warrantees the parameters
of the products that are stated by the technical conditions (TC) or the parameters agreed in the
agreement.
The supplier is not responsible for decline of quality caused by the purchaser while storing,
unprofessional installation or incorrect operation.
1.4 Under-Guaranty and After-Guaranty Service
All our products can be serviced by the professional service staff of our firm that provides
installation, operation, service, checking and troubleshooting.
The under-guaranty service is provided by the service department of the producer on the basis
of a written claim.
While claiming it is advised to present the following:
·
basic data from the nameplate (type and serial numbers)
·
period in operation, ambient conditions (temperature, humidity,…) operation mode including
switching frequency, type of switching (position or thrust), adjusted switching thrust).
·
a kind of failure - a description of the claimed failure
·
a copy or a transcription of Installation Certificate.
It is advised to perform the after-guaranty service by the service department of the producer or
by a contracted service firm.
1.5 Operation Conditions
1.5.1 Location of the Products and Operation Position
The EA can be built-in and operated in the sheltered places of industrial objects without any
temperature or humidity control and with a protection against direct climate exposure (e.g. direct
sunshine
Warning:
When the EA is installed in open air, it must be sheltered lightly to protect is against direct
effects of atmosphere.
When installed in the areas with relative humidity more than 80%, in open air under a
shelter it is needed to connect the space heater directly – without a thermal switch.
EA can be built-in and operated in any position. Standard position is with vertical axis of the output
part and with the control part placed above.
!