BA_REFUSOL 008K-020K_V08.1_EN
56
Copyright REFU
sol
GmbH
8 Options
8.1 Power Plug
Optionally, you can also order a larger connector housing with M32 cable gland that allows you to
connect a 5 x 10 mm² flexible power supply line.
Designation
REFU
sol
GmbH part no.
VC-AL-T3-Z-M32-S-PLOMB 0029939
8.2 Radiation and temperature Sensor
A radiation and temperature sensor can be optionally connected for recording the solar radiation
incidence and the module temperature. We recommend using the type Si-13TC-T-K. REFU part
no. 0030628. The scope of delivery of the radiation and temperature sensor includes the sensor
plug. The sensor plug can also be separately ordered from REFU
sol
GmbH under part no.
0030616.
The sensor comes with a 3 meter UV-resistant connecting line (5 x 0.14 mm²). The line can be
extended with a 5 x 0.25 mm² shielded line, max. 100m.
More information about the technical data of the sensor you will find in chapter 8 technical data
under 8.2
Si-13TC-T-K pin assignment
REFU
SOL
®
pin assignment:
Sensor
Red RD Supply voltage (12–24 VDC)
Pin 1
Black BK GND
Pin 2
Orange
OG Measurement signal for incident light
(0–10 V)
Pin 3
Brown BN Measurement signal for temperature
(0–10 V)
Pin 4
Gray GY Shielding
Pin 5
Note: The shield of the sensor line must be applied to PIN 2 and PIN 5!
The outer diameter of the connecting cable can be max. 8mm.
Figure No. 24
Connector M12 x 1 straight, shielded; pole arrangement: male M12, 5 pins,
A-coded, view of male connector side, Phoenix
nomination
: SACC-M12MS-
5SC SH
