REFUSOL 008K bis 20K, Operating Instructions Manual

Page: 57 / 71

BA_REFUSOL 008K-020K_V08.1_EN
Copyright REFU
sol
GmbH 57
Figure No. 25 Connection of the solar radiation sensor
The data of the Si-13TC-T-K can be called up with the following parameters:

D 1191.00 => incidence
 0–10 V => 0–1300 W/m²

D 1193.00 => temperature

0–10 V => –26.1° C to 90° C
This data can also be recorded in the data logger.
Note: If you do not use the temperature input, wire a jumper across PIN 4
and PIN 5. Alternatively, you can also wire the jumper to the
intermediate terminal point (cable extension).
8.3 Remote Monitoring System
The following options are available for remote monitoring:

REFU
log
: REFU
log
is a portal that has been developed by REFU
sol
for the purpose of
monitoring and recording solar system data. For more information and details, please refer
to the REFU
log
. Please contact REFU
sol
GmbH.

Web Log: Data logger by MeteoControl. Connection via RS485.

SolarLog: Data logger by Solare Datensysteme. Connection via RS485.
Where MeteoControl and Solarlog are concerned, data is imported from the inverters via an RS485
interface.
For information about the configuration, please refer to the Operating Instructions of the particular
data logger.