reflexmarine FROG-XT Series, User Manual

Page: 40 / 49

UM-0206(1) 39 | P a g e
6 Replacement Parts
6.1 Introduction
Frog-XT is a safety-critical item and only genuine Original Equipment
Manufacturer (OEM) parts should be used. This is of particular importance for the
wire rope lifting assembly due to its very specific bespoke design for this
application.
Replacement parts can be supplied as individual items or as appropriate kits. Prior to
ordering any replacement parts or kits, establish the serial number which is stamped on the
data plate. The serial number is, for example, XT4- ### where ### is a three-digit
number.
RML holds replacement parts and accessories in stock. We are able to supply most individual
components. A full list of parts is contained in the identification drawing pack issued with
every unit.
It may be advisable to hold an inventory of frequently replaced parts. This will help to
ensure the continued safe operation of the carrier. Minimum stock quantities will be
influenced by:
▪
Remoteness of location
▪
Downtime implications
▪
Usage
▪
Customs processing time
▪
Delivery cost for small parts
Contact Reflex Marine for recommended stock items and quantities for your operation.
6.2 Parts identification
Each assembly or part is assigned a part number which provides the identification.
Where material grades and material traceability are deemed to be safety-critical these
components will be allocated unique component numbers which will be stamped or etched
as required.
For bolts, where etching is impractical, batches will be colour coded and a note added to the
certificate to identify the colour used.
Components that require unique identification are referenced in the parts list.