Reflex Servimat L, Operating Manual

Page: 7 / 26

Installation
Servimat M/L — 28.01.2021
English — 7
Type Power output
(kW)
Power supply
(V / Hz , A)
Degree of
protection
Number of RS-485
interfaces
I/O module Electrical voltage
control unit
(V, A)
Noise level
(dB)
Weight
(kg)
Servimat M 1.1 230 / 50, 5 IP 54 1 No 230, 2 55 37
Servimat L 1.1 230 / 50, 5 IP 54 1 No 230, 2 55 53
5.2 Dimensions and connections
Type Weight
(kg)
Height
(mm)
Width
(mm)
Depth
(mm)
Device connection Degassing system
connection
Make-up
connection
Servimat M 36 1215 685 440 Internal thread 1 " Internal thread 1 " Internal thread ½ "
Servimat L 42 1215 600 525 Internal thread 1 " Internal thread 1 " Internal thread ½ "
5.3 Operation
Type System volume
(100% water)
(m³)
System volume
(50% water 50% glycol)
(m³)
Working pressure
(bar)
Permissible operating gauge
pressure
(bar)
Operating temperature
(°C)
Servimat M 220 – 0.5 – 4.5 8 >0 – 70
Servimat L 220 – 0.5 – 7.2 10 >0 – 70
Standard values for the maximum "Va" system volume to be degassed under
extreme conditions during commissioning at a nitrogen reduction from 18 mg/l
to 10 mg/l.
1
Continuous degassing "t"
[h] 2 System volume "Va" [m
3
]
5.4 Tanks
Primary tank Secondary tank
 Note!
Optional heat insulation is available for primary tanks, see chapter 4.6
"Optional equipment and accessories" on page 6 .
Type Ø “D”
(mm)
Weight
(kg)
Connection
(inches)
H
(mm)
h
(mm)
6 bar - 200 634 37 G1 1060 146
6 bar - 300 634 54 G1 1360 146
6 bar - 400 740 65 G1 1345 133
Type Ø “D”
(mm)
Weight
(kg)
Connection
(inches)
H
(mm)
h
(mm)
6 bar - 500 740 78 G1 1560 133
6 bar - 600 740 94 G1 1810 133
6 bar - 800 740 149 G1 2275 133
6 bar -
1000/740 740 156 G1 2685 133
6 bar -
1000/1000 1000 320 G1 2130 350
6 bar - 1500 1200 465 G1 2130 350
6 bar - 2000 1200 565 G1 2590 350
6 bar - 3000 1500 795 G1 2590 380
6 bar - 4000 1500 1080 G1 3160 380
6 bar - 5000 1500 1115 G1 3695 380
6 Installation
DANGER
Risk of serious injury or death due to electric shock.
If live parts are touched, there is risk of life-threatening injuries.
• Ensure that the system is voltage-free before installing the device.
• Ensure that the system is secured and cannot be reactivated by other
persons.
• Ensure that installation work for the electric connection of the device is
carried out by an electrician, and in compliance with electrical engineering
regulations.
CAUTION
Risk of injury due to pressurised liquid
If installation, removal or maintenance work is not carried out correctly, there is a
risk of burns and other injuries at the connection points, if pressurised hot water
or hot steam suddenly escapes.
• Ensure proper installation, removal or maintenance work.
• Ensure that the system is de-pressurised before performing installation,
removal or maintenance work at the connection points.
CAUTION
Risk of burns on hot surfaces
Hot surfaces in heating systems can cause burns to the skin.
• Wear protective gloves.
• Please place appropriate warning signs in the vicinity of the device.