Reflex Fillcontrol Auto 2P, Operating Manual

Page: 47 / 56

Controller
Fillcontrol Auto Make-up and degassing — 06.07.2016 - Rev. B English — 47
ER Code Alarm Floating
contact
Cause Remedy Alarm reset
31 EEPROM defective Yes • EEPROM defective
• Internal calculation error
Contact the Reflex Customer
Service
Quit
32 Undervoltage Yes Supply voltage not achieved Check power supply -
33 Adjustment
parameter faulty - EPROM parameter memory
defective Contact the Reflex Customer
Service Quit
34 Main board
communication
faulty - • Connecting cable defective
• Main circuit board defective
Contact the Reflex Customer
Service Quit
35
Digital input voltage
faulty
- Short-circuit of input voltage
Check the wiring at the
digital inputs (water meter,
for example)
-
36 Analogue input
voltage faulty - Short-circuit of input voltage Check the wiring at the
analogue inputs
(pressure/level) -
37 No input voltage for
the 3-ways motor
ball valve - Short-circuit of input voltage Check the wiring of the
motor ball valve -