5) Assemble the base.
0,7 cm
7
10
15
21
21
Insert the 8 -
1.5 cm dowels
into the ends
of the platform
supports.
If the dowels
are loose, add
a small drop of
glue.
Insert the crankshaft (from step 1) through a support, and add the
crankshaft spacer.
Slide the crankshaft
all the way up!
Add a small amount of glue
to the shaft so the spacer
is glued to it,
but no glue
on the support!
NOTE:
The dowel should
be 0.7 cm from the
bottom of the gear.
Add glue to the dowel and the edge of the spacer
and slide up the large gear to the spacer.
Insert and glue the 17 cm thicker dowel (main
shaft) into the small gear.
Great -
let the glue dry!
Small
amount!
Slide the spacer
all the way to
the right.
1.5 cm dowels!
Nice!
51759 AL.indd 17
25.06.2013 14:07:19
