We removed the round base
in the drawings below to
remove clutter!
16
17
2) Assemble the pieces for the upper platform and mast.
3) Assemble mast support
4) Insert canopy support dowels.
Start at the
top, and insert
- smallest to
longest - as
you turn the
mast counter
clockwise.
7 dowels - line them up!
- 1 at 8.5 cm
- 2 at 10.5 cm
- 1 at 11.5 cm
- 1 at 12 cm
- 2 at 13 cm
8
Screw eyes into the 4 star-
ter holes on one side of the
outer ring.
Glue the collar and mast supports in the
grooves.
Nice!
Insert support
into holes in
outer ring.
Gently push mast
through the collar
so the bottom of
the mast is 4 cm
below the collar.
No glue, this is
pressure fit
for now!
Let glue dry!
4 cm
8,5 mm
10,5 mm
10,5 mm
11,5 mm
12 mm
13 mm
13 mm
Push the dowel
right to the edge.
No need for glue!
(if they are loose,
you can add a
small drop!)
51759 AL.indd 16
25.06.2013 14:07:18
