Reflecta 4005039659102, User Manual

Page: 7 / 209

7
rninG
all tHis
anner
lled
use
tically
stall
p-
to
in a
he
ollow
yber-
has
be
er to
otoshop
Elements
Photoshop
p-
your
folder
have
le. If
Contact
>\Optional
-Ins\
have
Engli
sh
installing hardware
a. Connect the slide scanner to a power source.
1. L ocate the power switch on the lower right side of the scanner. make
sure the scanner is turned off .
2. Plug the aC adapter into an aC power source
First before plugging it into the scanner.
3. attach the usB cable to the computer using the stadard usB adapter
end. attach the usB adapter end of the cable to back panel of the
scanner.
Inserting Mounted Slides
attention b efore scanning…
make sure there is no lmstrip inside scanner before you insert the slide and
there is no slide inside scanner before you insert the lmstrip.
Please note the slide and lmstrip cannot be put into the
scanner at the same time.
M ounted S lides
1. insert the slide into the slot on the front of the unit, with the dull (emulsion)
side facing down
Manual-RPS10M.indd 7 23.12.2016 10:00:31