Reflecta 4005039659102, User Manual

Page: 13 / 209

13
E
nglis
h
set scan Preferences (Continued...)
3. trailing index after Base File name digits: defines the length of the
file name and numbering sequence up to 6 digits example image1 or
image000001.
4. options - use Film index: use the number assigned to the frame on it’s posi-
tion.
user defined start number: enter a specific customizable start number
5. Choose the file type , “tif” or “JPG”. (tif uncompressed or JPG Compressed-
Choose image quality for JPeG. (20-100) 100 offers the least amount of compres-
sion
advanced setting
”auto exposure” - attempts to find the correct exposure to get the widest range
of whites and blacks while putting the middle grays at around the middle of the
data range.
”auto Balance” - using the image histogram to balance RGB channels. it estimates
images’ color cast and adjust the images accordingly
“auto Contrast” - the scanner software analyzes the data and automatically
adjusts the setting for the White and Black Points.
”digital noise reduction” – applies a filter, reducing the film grain.
”multipass Xposure” -
When enabled multi-exposure performs a triple scan to obtain the best possible
image, this process captures the three individual scans, first a normal pass then two
more scans to highlight the shadow details to expose the darker areas more fully,
the software then intuitively calculates the final scan, which now contains the data
from all three scans.
”multiple sampling” -
Configure the settings to scan a single image (multiple times) 2x, 4x, 8x or 16x for
the highest quality output. Please note this greatly increases scan time. With multi-
sampling image noise is a thing of the past.
Manual-RPS10M.indd 13 23.12.2016 10:00:31