Reese Aitchison Seedmatic 40 D Series, Manual

Page: 62 / 64

61
Start-Up
After power on the control displays Area for 2 seconds.
During this time the control performs its own self tests.
During this period it is also possible for the user to switch
To Options mode.
Pressing Change and Display buttons at the
same time, whilst the control is in the initial
test mode enters the option change mode.
Initially Circ for Circumference is displayed for 2 seconds
Press change to increase the circumference to the
value required. Note the maximum circumference
is 5.12 metes, always displayed in meters ie 5m12cm
Press and hold will increment automatically.
Press display once to store the new circumference and
Move on to input the span of the machine.
Press change to increase the machine span to the
value required. Note the maximum machine width
is 25.6 meters, always displayed in meters
ie 25m60cm, Press and hold will increment
automatically.
Press display once to store the new span value and
Move on to the operational mode.
Operational Mode
DISPLAY CHANGE
CHANGE
DISPLAY
DISPLAY
CHANGE