Reese Aitchison Seedmatic 40 D Series, Manual, Page: 63 / 64

62
After the initial 2 second display of area the control will always switch to
display the identifier for the last Mode i.e. if switched off in distance then
on in distance.
There are seven displayed modes of operation. These are swapped
sequentially with each press of the display button. Holding the button
displays a character sequence as an identifier. Press and hold the change
button to reset the area and distance counts.
Running Hectare and Acre Display
Displays an accurate running Hectare Area covered.
The smallest denomination displayed is
0.001 Hectares ie 10 m2.
Press and hold change to clear the running
Area store. Note this also clears the
running Acre display
Press display once to convert to show in Acres.
Total Hectare and Acre Display
Press Display again to change to the total or machine area displays
This displays an accurate running Hectare Area covered.
The smallest denomination displayed is
0.001 Hectares ie 10 m2.
Press and hold change to clear the running Area store.
Note this also clears the running Acre display
Press display once to convert to show in Acres.
DISPLAY
CHANGE
CHANGE
DISPLAY
DISPLAY