23
k) Trimming the quadcopter
If you find that the quadrocopter always wants to fly in a certain direction while hovering, even without a control com
-
mand from the transmitter and without external influence such as wind or draught, adjust the flight behaviour using
the trim.
Every time a trim button is pushed, the trim is adjusted by one step and the adjustment confirmed by a short
beep. When the button is pressed and held, the transmitter emits a quick sequence of beeps, and thus
indicates the step-by-step adjustment of the trim. Once the trim's end position is reached, no more beeps
are emitted by the transmitter. The middle position of the trim is audibly indicated with a higher pitched
beep.
Roll trimming:
If the quadrocopter drifts or tips sideways to the right, slowly reduce the flight altitude until the quadrocopter is safely
back on its landing feet. Press the left trim button for the roll function (see also Figure 1, no. 7) several times.
Then, carefully push the pitch joystick forwards again and check whether the adjustment was sufficient. Repeat the
procedure until the model does not show any tendency to drift to the right.
If the quadrocopter wants to drift sideways to the left, press the right trim button for the roll function (see also Figure
1, no. 6).
Figure 15
Summary of Contents for R5-Foldable FPV Drone RtF
Page 1: ...Operating Instructions Electrical quadrocopter R5 Foldable FPV Drone RtF Item No 1714585 ...
Page 41: ...41 ...
Page 42: ...42 ...
Page 43: ...43 ...
