8
b)
Before first use
•
Select a suitable location to operate your model.
•
When switching on the quadrocopter, follow the procedure described below in a separate chapter. This
ensures that the transmitter and receiver connect properly and that your model responds reliably to
remote control commands of your transmitter.
•
Ensure that there are no other models operated on the same transmission frequency (2.4 GHz) within
range of the remote control. Always check whether there are any other 2.4 GHz transmitters that may
interfere with your model.
•
Check that your model and remote control are safe to use. Pay attention to visible damage such as
broken connectors or damaged cables. All moving parts on the model must operate smoothly, but there
must be no play in the bearing.
•
Check that the rotors are secure and in the correct position before each use.
• The flight battery required for operation must be charged before use.
• Always ensure that the non-rechargeable batteries in the transmitter have sufficient remaining capacity
(see transmitter LED). If the non-rechargeable batteries are empty, always replace the complete set.
Never replace individual cells.
c) During operation
•
Do not take any risks when using the product! Always use the model responsibly, otherwise you may
endanger yourself and your surroundings.
•
Improper use can cause serious personal injury and damage to property! For this reason, make sure that
you maintain a sufficient safety distance from people, animals and objects.
• Only fly the model when you are fully alert and able to respond. Fatigue, alcohol and medication can
affect your ability to respond.
•
Keep objects and body parts away from the running rotors.
• Do not fly the model towards spectators or towards yourself.
• Never try to grab hold of the flying quadrocopter with your hands.
• Motors, motor controller and flight battery can become hot during operation. For this reason, take a 5 to
10 minute break before recharging the flight battery or restarting the model with a charged spare battery.
•
Always leave the remote control (transmitter) switched on when the model is in operation. After landing,
always switch off the quadrocopter first before you switch off the remote control.
•
Never switch off the transmitter during operation while the quadrocopter is still running.
•
Do not expose the model or the remote control to direct sunlight or excessive heat for prolonged periods.
•
In the event of a severe crash (e.g. from a high altitude), the electronic gyro sensors may be damaged.
Always check that the model is functioning properly before flying it again!
•
In the event of a crash, switch off the rotor motors immediately. Rotating rotors may be damaged if they
come into contact with obstacles or in the event of an impact. Check the rotors for any signs of cracks or
damage before flying the model again!
•
To avoid damage to the model due to a crash caused by an undervoltage/deep discharge of the re-
chargeable battery, we recommend that you monitor the undervoltage indicators during the flight.
Summary of Contents for Foldable Drone G-Sense
Page 1: ...Operating Instructions Electrical quadrocopter Foldable Drone G Sense RtF Item No 1697439 ...
Page 41: ...41 ...
Page 42: ...42 ...
Page 43: ...43 ...
