36
8. Final Assembly of the model airplane
In the further course of these instructions, figures in the text always refer to the adjacent figure or the figures
within the section. References to other figures are indicated with the corresponding figure number.
The model shown in the instructions serves illustrative purposes only. The colouration and design of the
serially delivered model may deviate from the model shown in the instructions.
Before starting with the assembly of the model, prepare an appropriate surface. In order to achieve outstanding flight
performance, your model is made of light-weight formed foam. The disadvantage of this material is that its surface is
sensitive. Small inattentions during the assembly of the model lead to ugly dents and scratches very quickly.
a) Removing the Canopy
In order to take off the canopy (1), the canopy closure (2)
must be turned to the left or right by 90°.
Then you can lift the hood off at the closure and pull it
away backwards.
Install the cabin hood in the reverse order.
Figure 2
