45
Depending on the menu item called, the flight controller now emits 1, 2 or 3 short signals ( - , - - , - - - ). The assignment
of the signal sounds can be taken from the following table.
Function
1x short sound
2x short sounds
3x short sounds
Brake
On
Switched off
Battery type
LiPo
NiMH
Motor deactivation
Soft (reduce)
Hard (switch off)
Deactivation voltage
Low (2.85 V/cell)
Medium (3.15 V/cell)
High (3.3 V/cell)
Motor start-up behaviour
Normal
Soft
Very soft
Motor timing
Low (3.75°)
Medium (15°)
High (25°)
When the desired setting has been acoustically indicated, move the control lever for the motor function to the full throt-
tle position without delay. The motor will alternatingly emit two high and two low signal sounds ( ¯ _ ¯ _ ) to confirm
that the selected value is saved.
In order to leave the programming menu, move the control lever for the motor function back to the "motor off" position
within two seconds. There will be a sound sequence that indicates the cell number and a slightly longer sound. The
flight controller is ready again.
If the control lever for the motor function is not moved to the "motor off" position, the flight controller remains
in programming mode and switches through the menu items acoustically. Further settings can be made.
Disconnecting the flight battery or calling menu item 8 leaves the programming menu.
