21
c) Make the Model Ready to Start
Make your quadrocopter ready for operation by binding the quadrocopter with the activated transmitter. The model
will now emit a transmission signal.
Activate the "WiFi function" in your Smartphone under "Settings". Then connect the "Q Pro-FPV" App to the quadro-
copter in order to connect the model to your Smartphone. Now start the App. The starting screen (figure 13) appears.
Function of the app
Figure 13 shows the home page of the app. There are
three options there:
1 Question mark symbol = Call the help menu
2 Gear symbol = Make settings
3 Symbol "play" = Start App
Question mark symbol (1)
If you select this, you will see a new view in which you will find the corresponding notes on operation in English. They
can help you if you do not have your operating instructions at hand. To leave the help function, select the symbol at
the upper left. You will be returned to the main menu (figure 13).
Gear symbol (2)
If you have chosen this symbol, you will see a new view in which you can set the following function:
•
"Parameters auto save":
Automatic storage of pictures and videos (recommended)
•
"Reverse control screen by gravity sensing":
Turn the display on the Smartphone depending on position of the display (recommended).
•
"Right hand mode":
With this function, you can switch the control from mode 2 to mode 1. Observe the notes in chapter 11 for the dif-
ferences between mode 1 and mode 2.
•
"720P preview":
This function is not planned for this model and will not work.
To leave the setting function, select the symbol at the upper left. You will be returned to the main menu (figure 13).
Figure 13