background image

21

20. Disposal

a) Product

  Electronic devices are recyclable waste and must not be disposed of in the household waste. Always 

dispose of the product according to the relevant statutory regulations.

 

Remove any inserted batteries/rechargeable batteries and dispose of them separately from the product.

b) Batteries

You are required by law to return all used batteries (Battery Directive). Batteries must not be placed in household 

waste.

  Batteries containing harmful chemicals are labelled with this symbol to indicate that disposal in household 

waste is forbidden. The abbreviations for heavy metals in batteries are: Cd = Cadmium, Hg = Mercury, 

Pb = Lead (indicated on the battery, e.g. below the waste bin icon on the left).

Used batteries can be returned to local collection points, our stores or battery retailers.

You thus fulfil your statutory obligations and contribute to the protection of the environment.

21. Declaration of Conformity (DOC)

Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declares that this product conforms to the 

2014/53/EU Directive. 

  Click on the following link to read the full text of the EU Declaration of Conformity:

 

www.conrad.com/downloads

 

Select a language by clicking on the corresponding flag symbol and then enter the product order number 

in the search box. The EU Declaration of Conformity is available for download in PDF format.

Summary of Contents for 1302221

























Reviews: