![background image](http://html1.mh-extra.com/html/wac/ctr-wdmx-3ch/ctr-wdmx-3ch_installation-and-function-instructions_3099047001.webp)
INSTALLATION & FUNCTIONAL INSTRUCTION
Wireless DMX LED Controller – 3 CHANNELS
CTR-WDMX-3CH
AiSPiRE.com
Phone (800) 526.2588
Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Ave
Ontario, CA 91761
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program
. FEB 2023
1.
SAFETY INSTRUCTION
IMPORTANT: NEVER attempt any work without shutting off the electricity.
•
Always turn off power at fuse box prior to installation to prevent electrical shock.
•
Intended for indoor use. Dry and damp locations.
•
Install in accordance with national electric code, and local regulations.
•
Consult with local inspector to assure compliance.
•
Do not submerge, or install within 5 feet of a swimming pool.
•
Do not connect the unit directly to 120V AC Line
CAUTION – TO REDUCE RISK OF FIRE AND ELECTRICAL SHOCK
•
Read all instructions before installing.
•
Handle product with care.
•
To reduce the risk of overheating and potential fire risk, make sure all connections are tight.
•
Do not modify or disassemble product beyond instructions or warranty will be void.
•
Failure to follow safety warnings, and installation instruction will void the warranty
ATTENTION - AFIN DE RÉDUIRE LES RISQUES D'INCENDIE ET DE CHOC ÉLECTRIQUE
•
Lire toutes les instructions avant d'installer.
•
Manipuler le produit avec soin.
•
Afin de réduire le risque de surchauffe et d'incendie potentiel, s'assurer que toutes les connexions sont bien serrées.
•
Ne pas modifier ou démonter le produit au-delà des instructions sous peine d'annuler la guarantie.
•
Ne pas respecter les avertissements de sécurité et des instructions d'installation annulera la garantie.
WIRING AND INSTALLATION:
1.
Turn Power off at circuit breaker (See FIG. 1)
FIG. 1
2.
Wireless DMX LED Controller has 2 ways for power feed.
Option A:
3 input power terminals on the left of side. Each input terminal can be
linked with only 24VDC, 96W maximum. (See FIG. 2)
Option B:
1 input power terminal in the center. This center input terminal can be
linked with 24VDC, 300W maximum. (See FIG. 2)
FIG. 2
3.
Pay attention to where input and output are.
Using 300W Power Supply
All output 1-3 will receive power and provide 96W
maximum on each output channel.
Using 96W Power Supply
Output 1 will receive power from Input 1 only.
Output 2 will receive power from Input 2 only.
Output 3 will receive power from Input 3 only.
If the power feeding is on different input, the light
product might not receive power to operate
correctly.
4.
Mounting
remote power supply and Wireless DMX LED Controller at desired
location and wire the power to DMX LED Controller. (See FIG. 3)
FIG. 3
3 input of 24VDC.
Each has 96W Max.
ANTEN
NA
OFF
ON
D
MX
TERM
INA
TIO
N
CH1 - 96W Max.
LI
G
H
T O
UT
PUT
3
DMX R
J45
DMX T
ERMIN
AL
DMX CONTROL SETTING
0
5 6
7 9
GN
D
D+
D-
D+
D-
Pin 7 :
GN
D
Pin 8 :
GN
D
Pin
1 : D
ata +
Pin
2 : D
ata -
Pin 1 :
GN
D
Pin
2 : D
-
Pin 3 :
D+
1
3
2
1
3
2
8
1
+
-
RGBWW
CCT
TUNING
LED Controller
DMX ADDRESS SETTING
D
+
CH3 - 96W Max.
Tc
D
+
-
+
D
CTR-WDMX-3CH
-
+
-
+
CH1 - 96W Max.
CH2 - 96W Max.
OUTPUT
INPUT
CH2 - 96W Max.
CH3 - 96W Max.
-
-
-
-
-
Digit 1
Digit 2
Digit 3
0-5
0-9
0-9
Reset
-
+
INPUT
300W - All CHs
1 input of 24VDC, 300W Max.
AN
TENNA
OFF
ON
DMX
TER
MIN
ATI
ON
DMX RJ
45
DM
X T
ERM
IN
AL
G
ND
D+
D-
D+
D-
Pin
7 : G
ND
Pin
8 : G
ND
Pin 1
: D
ata +
Pin 2
: D
ata -
Pin
1 : G
ND
Pin
2 : D
-
Pin
3 : D
+
1
3
2
1
3
2
8
1
GR
N L
INPUT
W
T
B
K
+
OUTPUT
RD
+
-
0-10V
Dimmer
PR GY
BK
-
Dimmable Constant Voltage LED Power Supply
Tc
PS-24DC-U96R-S6
Input: 120-277VAC,50/60Hz 1.0A Max PF?0.9
Output: 24VDC 4.0A 96W ( Class 2 )
Dimmable with 0-10V @120-277VAC
Dimmer, if used, must be electronic low-voltage dimmer @120VAC
Suitable for Damp Locations
CONVIENT AUX EMPLACEMENTS HUMIDES
Tested To Comply With FCC Standards
For supply connections use wires rated for at least 75?C (167?F)
LES FILS D'ALIMENTATION 75 ?C MIN
/PI
Made In China
CH1 - 96W Max.
LI
G
HT
O
UT
PUT
3
DMX CONTROL SETTING
0
5 6
7 9
+
-
RGBWW
CCT
TUNING
LED Controller
DMX ADDRESS SETTING
D
+
CH3 - 96W Max.
Tc
D
+
-
+
D
CTR-WDMX-3CH
-
+
-
+
CH1 - 96W Max.
CH2 - 96W Max.
OUTPUT
INPUT
CH2 - 96W Max.
CH3 - 96W Max.
-
-
-
-
-
Digit 1
Digit 2
Digit 3
0-5
0-9
0-9
Reset
-
+
INPUT
300W - All CHs