15
5. Now place the finished win on the fuselage and then fit the wing with the area rubbers supplied. Ensure that the wing halves are fitted at the same
distance to the height rudder. For deviations you can balance the erroneous distance by laying paper strips between wing half and fuselage. You
can detect this best if your aeroplane model is looked at from behind at a distance of approx. 2 m.
For double deckers, remove the two-sided adhesive tapes and press
the top and bottom wings to the fuselage. Then stick the distance piece between the wings.
6. Finally, you must attach the landing gear to the bottom of the fuselage and stick the spinner
(propeller) to the engine axle which is on the front of the fuselage.
Same distance between
elevator and wing
Same distance between
elevator and wing
Vertical rudder
Wing
Elevator
Fuselage
Top wing
Bottom wing
Distance piece
Distance piece
Summary of Contents for 23 04 49
Page 35: ...35 ...
