53
i) Checking the swash plate control
If the swash plate is aligned horizontally with a switched-on transmitter, check the control devices immediately.
If the control stick for the nick and roll function (see figure 1, item 4) is pushed to the front, the swash plate must also
tilt to the front as seen in the flight direction. If the stick is pulled to the rear, the swash plate must also tilt backward.
Figure 11
If the control stick for the nick and roll function (see figure 1, item 4) is pushed to the front, the swash plate must also
tilt to the front as seen in the flight direction. If the stick is pushed to the right, the swash plate must also tilt to the right.
Figure 12
Should the swash plate behave opposite to the above description then you can reverse the steering direction with the
help of the DIP switches on the back of the transmitter. Please refer to the section "Changing the steering directions"
for additional information on this subject.
Summary of Contents for 20 69 33
Page 134: ...134 ...
Page 135: ...135 ...
