Reefe RPS036, Instruction Manual & Warranty

Page: 5 / 12

Page
5 Ascento Group Australia P: 1800 807 604 E: csv@ascento.com.au
INSTRUCTION MANUAL & WARRANTY – REEFE RPS036 & RPS050
Multistage Submersible Pump
** Please leave this guide in a safe place for the owner **
PERFORMANCE DATA
CODE MODEL
POWER RATED MAXIMUM
FLOAT
SWITCH
CABLE
LENGTH
OUTLET
(mm)
SIZE L x W x H
(mm) AMPS
P1
(kW)
P2
(kW)
FLOW
(L/min)
HEAD
(m)
FLOW
(L/min)
HEAD
(m)
12178 RPS036 3.5 0.8 0.45 40 28 100 37m - 10m 25FBSP 150 x 160 x 650
12185 RPS050 4.6 1.2 0.75 50 38 100 50m - 10m 25FBSP 150 x 160 x 800
13588 RPS036F 3.5 0.8 0.45 40 28 100 37m Yes 10m 25FBSP 150 x 160 x 650
15582 RPS050F 4.6 1.2 0.75 50 38 100 50m Yes 10m 25FBSP 150 x 160 x 800
NOTE: Performance data quoted is generally from test data and does not take into account factors in the installation such as loss of pressure and flow due to pipework & pipe-fittings & valves.
INSTALLATION GUIDELINES
Please read and follow the instructions which are to be read in conjunction with the diagrams on the earlier pages. Ensure all
installations are in compliance with any relevant Australian Standards, this is the installers responsibly. Warranty covers
manufacturing defects of the pump; it does not include faults in the installation. Note that all warranty is voided if the instructions
are not followed. Use for CLEAN FRESH WATER only.
IMPORTANT INSTALLATION & WARRANTY
CONDITIONS
1) A “First -flush- diverter” or similar device must be installed, and /or a filter screen through
which all the incoming water passes before entering the tank, to prevent debris from
entering the tank.
2) Warning: when lowering Pump into Rainwater Tank: Use the rope supplied to lower the
pump into the tank. DO NOT USE THE POWER CABLE. Using the power cable will lead to
pump failure which will not be covered by warranty, all costs will be borne by the installer.
3) Install the pump UPRIGHT in the tank. The length of the pump must be vertical, it must
not be on an angle off vertical, it must not be horizontal.