reedinstruments
www
com
1
Battery & Fuse Replacement
WaRninG:
.To.avoid.electric.shock,.disconnect.the.test.leads.from.any.
source.of.voltage.before.removing.the.battery.or.fuse.cover..
Do.not.operate.your.meter.with.the.cover.removed..Be.sure.
it.is.in.place.and.fastened.securely.
Battery Replacement
When.the.battery.level.gets.low.or.falls.below.the.operating.voltage,.the.
battery.warning.symbol.“
”.will.appear.in.the.LCD.display.
1..Disconnect.the.test.leads.from.the.meter.
2..Open.the.battery.cover.by.loosening.the.screw.using.a.Phillips.head.
screwdriver.
3..Insert.the.battery.into.battery.holder,.observing.the.correct.polarity.
4..Put.the.battery.cover.back.in.place..Secure.with.the.two.screws.
noTE:
If.your.meter.does.not.work.properly,.check.the.fuses.and.battery.
to.make.sure.that.they.are.still.good.and.that.they.are.properly.
inserted.
Replacing The Fuses
1..Disconnect.the.test.leads.from.the.meter.and.any.item.under.test.
2..Open.the.fuse.door.by.loosening.the.screw.on.the.door.using.a.Phillips.
head.screwdriver.
3..Remove.the.old.fuse.from.its.holder.by.gently.pulling.it.out..
4..Install.the.new.fuse.into.the.holder.
5..Always.use.a.fuse.of.the.proper.size.and.value.(0.5A/1000V.fast.blow.
for.the.400mA.range,.10A/1000V.fast.blow.for.the.10A.range).
6..Put.the.fuse.door.back.in.place..Insert.the.screw.and.tighten.it.securely.
For.service.on.this.or.any.other.REED.product,.contact.REED.Instruments.
[email protected].
