reedinstruments
www
com
DC/DC Voltage Measurement
1..Insert.the.black.test.lead.into.the.negative.COM.terminal.and.the.red.
test.lead.into.the.positive.V.terminal.
2..Set.the.function.switch.to.the.VAC.or.VDC.position..
3..Use.the.MODE.button.to.select.AC.or.DC.Voltage.
4..Connect.the.test.leads.in.parallel.to.the.circuit.under.test.
5..Read.the.voltage.measurement.on.the.LCD.display
DC Current Measurement
1..Insert.the.black.test.lead.banana.plug.into.the.negative.(COM).jack.
2..For.current.measurements.up.to.4000uA.DC,.set.the.function.switch.to.
the.uA.position.and.insert.the.red.test.lead.banana.plug.into.the.(uA).jack.
3..For.current.measurements.up.to.400mA.DC,.set.the.function.switch.to.the.
mA.range.and.insert.the.red.test.lead.banana.plug.into.the.(mA).jack.
4..For.current.measurements.up.to.10A.DC,.set.the.function.switch.to.the.
A.position.and.insert.the.red.test.lead.banana.plug.into.the.10A.jack.
5..Press.the.AC/DC.button.until.“DC”.appears.in.the.display.
6..Remove.power.from.the.circuit.under.test,.then.open.up.the.circuit.at.
the.point.where.you.wish.to.measure.current.
7..Touch.the.black.test.probe.tip.to.the.negative.side.of.the.circuit..Touch.
the.red.test.probe.tip.to.the.positive.side.of.the.circuit.
8..Apply.power.to.the.circuit.
9..Read.the.current.in.the.display..The.display.will.indicate.the.proper.
decimal.point,.value.and.symbol.
AC Current Measurement
1..Insert.the.black.test.lead.plug.into.the.negative.(COM).socket.
2..For.current.measurements.up.to.10A,.set.the.function.switch.to.the.A.
position.and.insert.the.red.test.lead.plug.into.the.(10A).jack.
3..For.current.measurements.up.to.400mA,.set.the.function.switch.to.the.
mA.range.and.insert.the.red.test.lead.banana.plug.into.the.(mA).jack.
4..For.current.measurements.up.to.10A.AC,.set.the.function.switch.to.the.
A.position.and.insert.the.red.test.lead.banana.plug.into.the.10A.jack.
continued ...
