background image

12

Accessories and Replacement Parts 

sB-01

 Replacement Windshield Ball

CA-05A

 Soft Carrying Case

R8888

 Deluxe Hard Carrying Case

R8090

 Sound Level Calibrator

R1500

 Tripod

Don't see your part listed here? For a complete list of all accessories and 
replacement parts visit your product page on www.reedinstruments.com.

Product Care

To keep your instrument in good working order we recommend the following:

•  Store your product in a clean, dry place.
•  Change the battery as needed. 
•  If your instrument isn't being used for a period of one month or longer 

please remove the battery.

•  Clean your product and accessories with biodegradable cleaner. Do not 

spray the cleaner directly on the instrument. Use on external parts only.

Product Warranty

REED Instruments guarantees this instrument to be free of defects 
in material or workmanship for a period of one (1) year from date of 
shipment. During the warranty period, REED Instruments will repair or 
replace, at no charge, products or parts of a product that proves to be 
defective because of improper material or workmanship, under normal 
use and maintenance. REED Instruments total liability is limited to repair 
or replacement of the product. REED Instruments shall not be liable for 
damages to goods, property, or persons due to improper use or through 
attempts to utilize the instrument under conditions which exceed the 
designed capabilities. In order to begin the warranty service process, 
please contact us by phone at 1-877-849-2127 or by email at  
[email protected] to discuss the claim and determine the appro-
priate steps to process the warranty.

 

REED Instruments

1-877-849-2127 | [email protected] | www.reedinstruments.com

Summary of Contents for R8080















Reviews: