19
MAX/MIN Measurement
1. Press the
MAX/MIN
button to select the maximum reading as
indicated by the "MAX" symbol. The Max value is updated when a
new maximum data value has been attained.
2. Press the
MAX/MIN
button again to select the minimum reading as
indicated by the "MIN" symbol. The Min value is updated when a
new minimum data value has been attained.
3. Press and hold the
MAX/MIN
button to exit and resume
normal operation.
Data Hold
1. While taking a measurement, press the
HOLD
button to freeze the
current reading on the display.
2. While in this mode, an "H" symbol will appear.
3. Press the
HOLD
button again to exit and resume normal operation.
Backlight
Press and hold the button to turn the LCD Backlight on and off.
Battery Replacement
1. Remove the Phillips screw on
the back of the meter.
2. Open the battery compartment.
3. Replace the 3 X AAA batteries.
4. Properly secure the cover and
tighten the screw.
Applications
• Industrial maintenance teams performing scheduled and preventative
maintenance on electro-mechanical equipment and systems.
• Facilities, building maintenance and electricians looking to troubleshoot
electrical equipment installation problems.
1
2
3
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
