9
www.REEDINSTRUMENTS.com
Keypad Description
The four button keypad allows for easy set-point temperature. The
temperature set-point can be set to a resolution of 0.1°F or °C.
SET
The
SET
button is used to confirm the selected value
within the parameter and to exit the set up mode and
resume normal operation.
Note:
At any time, you can press the
SET
button to exit the
Setup mode and resume normal operation.
The enter button is used to scroll through parameters.
The up arrow is used to increase temperature values and to
toggle between menu options within the selected parameter.
The down arrow is used to decrease temperature values
and to toggle between menu options within the
selected parameter.
Operating Instructions
Initial Start up
1. Place the calibrator on a flat surface with at least 8" of free space
around the instrument.
2. Connect the included power cord and plug into a power outlet.
3. Turn the calibrator on by toggling the power switch to ON.
4. The fan should begin blowing air through the instrument.
5. After a brief 3 second self-test, the calibrator will begin normal
operation by displaying both the current target surface temperature
and the last registered set temperature.
Note:
When the calibrator is first powered ON, the default set temperature
is set to 50°C. Refer to
Setting the Temperature Set-Point
for details.
6. The calibrator will now heat up to reach the registered set temperature.
Note:
The top display (Green LED) will continue to update the current
temperature until the set temperature is reached.
continued...
1.888.610.7664
REED-Direct.com
