8
www.REEDINSTRUMENTS.com
Note:
The fan inside the calibrator has two speeds and runs continu-
ously when the unit is in operation. The fan runs slow for heating and
maintaining operation and runs fast for rapid cooling. The area around the
calibrator must be kept clear to allow adequate ventilation. The airflow is
directed out the front and can be extremely hot.
Status Indicator Description
Note:
Using any other parameter other than the ones described in this
manual will affect performance and could damage the calibrator.
AT
Auto-Tuning Parameter Adjustment (For Authorized Service
Centers Only).
OUT
Heating Output Power Indicator.
ALM1
Overload Alarm indicates that the IR Calibrator temperature
exceeds the set temperature. To set the alarm, refer to
Setting Overload Alarms 1 & 2
for details.
Note:
When triggered the heating output power is
turned off.
ALM2
Overload Alarm indicates that the IR Calibrator temperature
exceeds the set temperature. To set the alarm, refer to
Setting Overload Alarms 1 & 2
for details.
Note:
When triggered, the rapid cooling process will begin.
°F/°C
Temperature unit of measure.
AT
°F
°C
OUT ALM1 ALM2
1.888.610.7664
REED-Direct.com
