background image

25

 THE INFORMATION MODE

The console features an information mode that keeps 
track of treadmill information and allows you to person-
alize console settings.

1.  Select the information mode.

 

 To select the information mode, hold down the Stop 
button while inserting the key into the console and 
then release the Stop button. When the information 
mode is selected, the following information will be 
shown:

 

 The time display will show the total number of 
hours that the treadmill has been used.

 

 The distance display will show the total number 
of miles (or kilometers) that the walking belt has 
moved. 

 

 The lower section of the display will show the 
status of an iFit module. If an iFit module is con-
nected, the display will show the words WIFI 
MODULE. If a USB module is connected, the 
display will show the words USB/SD MODULE. If 
no module is connected, the display will show the 
words NO IFIT MODULE.

2.  Select the optional screens.

 

 While the information mode is selected, the matrix 
will display several optional screens. Press the 
decrease button next to the Enter button to select 
each of the following screens:

 

 

UNITS

——To change the unit of measurement, press 

the Enter button. To view distance in miles, select 
ENGLISH. To view distance in kilometers, select 
METRIC.

 

 

DEMO

——The console features a display demo 

mode, designed to be used if the treadmill is dis-
played in a store. While the demo mode is turned 
on, the console will function normally when you 
plug in the power cord, press the power switch 

into the reset position, and insert the key into the 
console. However, when you remove the key, the 
displays will remain lit, although the buttons will not 
function. If the demo mode is turned on, the word 
ON will appear in the matrix. To turn on or turn off 
the demo mode, press the Enter button.

 

 

CONTRAST LVL

——Press the Incline increase and 

decrease buttons to adjust the contrast level of the 
display.

 

 If a module is connected, you may also select 
the following screen:

 

 

TRAINER VOICE

——To turn on or turn off the voice 

of the personal trainer, press the Enter button.

 

 If an iFit module is connected, you may also 
select the following screens:

 

 

DEFAULT MENU

——The default menu will appear 

when you insert the key into the console or when 
you press the Home button. Press the Enter button 
repeatedly to select the manual main screen or the 
iFit screen as the default menu.

 

 

CHECK WIFI STATUS

——Press the Enter button 

to check the status of your iFit module. The lower 
display will show the software version number, the 
network SSID, the network encryption type, the 
connection status, the wireless signal strength, the 
IP address of the module, the number of registered 
users and their names, the results of the DNS 
lookup, and the status of the iFit server.

 

 

SEND/RECEIVE DATA

——To send and receive 

workouts, workout logs, and updates, press the 
Enter button. When the process is 

 nished, the 

words TRANSFERS DONE will appear in the 
display.

3.  Exit the information mode.

 

 To exit the information mode, remove the key from 
the console.

Summary of Contents for 710 Elliptical





































Reviews: