16
15. Raise the Frame (104) to the position shown.
Have a second person hold the Frame until
this step is completed.
Orient the Storage Latch (51) so that the large
barrel and the latch knob are oriented as shown.
Remove any ties from the end of the Storage
Latch (51). Attach the lower end of the Storage
Latch to the Base (86) with a 3/8" x 2" Bolt (2)
and a 3/8" Nut (13).
Attach the upper end of the Storage Latch (51)
to the Frame (104) with a 3/8" x 2" Bolt (2) and a
3/8" Nut (13).
15
104
51
13
2
Large
Barrel
Latch
Knob
2
13
86
17.
Make sure that all parts are properly tightened before you use the treadmill.
If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the
oor or carpet, place a mat under the treadmill.
Note: Extra parts may be included. Keep the included hex key in a secure place; the hex key is used to adjust
the walking belt (see pages 28 and 29).
16
84
84
86
104
7
7
13
13
16. Attach the Wheels (84) to the Base (86) with two
3/8" x 2 1/2" Bolts (7) and two 3/8" Nuts (13).
Do
not overtighten the Nuts; the Wheels must
turn freely.
See HOW TO FOLD AND MOVE THE
TREADMILL on page 26. Lower the Frame (104)
to the floor.
Slide the Left and Right Base Covers (87, 88)
down onto the Base (86).
88
87
Summary of Contents for 710 Elliptical
Page 5: ...5...
