12
6. Identify the Left and Right Base Covers (87, 88).
Slide the Left and Right Base Covers onto the
Left and Right Uprights (79, 80) as shown.
88
80
79
87
6
7. Slide the Left Upright Cover (74) onto the Left
Upright (79). Remove the tie from the bracket
on the Left Handrail (76). If necessary, press the
5/16" Cage Nuts (29) back into place.
Hold the Left Handrail (76) near the Left Upright
(79). Insert the Upright Wire (81) through the
bracket on the bottom of the Left Handrail.
Pull the Upright Wire out of the end of the Left
Handrail.
Attach the Left Handrail (76) to the Left Upright
(79) with two 5/16" x 1" Flat Head Screws
(4) and a 5/16" x 1" Bolt (5) with a 5/16" Star
Washer (10);
do not tighten the Screws and
the Bolt yet.
Attach the Right Upright Cover (not shown)
and the Right Handrail (not shown) in the
same way.
Note: There is no wire on the right
side.
29
74
Bracket
4
5
10
76
79
81
7
Summary of Contents for 710 Elliptical
Page 5: ...5...
