Rev 20220606
RX2505AC
Page
19
of
35
Figure 5-3 - Terminal cover
Figure 5-2 – Cable crimping instructions
Figure 5-4 - Wiring terminals
Requirements
1.
Install an
AC
circuit
breaker
between
the
inverter
and
the
grid before
connecting
the
system
to
the
grid.
2.
Grid
voltage
and
grid
frequency
should
be
within
the
allowable
range
of
inverter
operation.
Steps
1. First, prepare the required connecting wires according to the following. It is recommended that
the live wire be red, the ground wire be black, and the safety earth wire be yellow and green.
2. Remove the cover of the terminal
3. Note the wiring terminals