•
Prepare the Turn buckle rods by installing the ball link and install on servo arm
◦
the turn buckle wrench from RedWing RC makes this and other field adjustments a
breeze
•
Locate the SFG (Side Force Generators) location in the ends of the wings on the second
rib. Use the heated soldering iron to open the slots in the wing.
•
Insert the pre painted metal SFG mounts through the holes you just made and run the
bolts through the SFG and tighten into the mounts both top and bottom of wing.
•
Repeat steps above for second wing.
◦
Install the wings, wing tubes, and wings bolts on the final assembly