Redsail Laser
Focus length: 62mm (from the surface of processed material to the up surface of
the diamond board, it is marked with a red arrow in this figure)
3. Ray path adjusting
1) Reflect mirror adjusting
Stick a piece of paper on 1
st
reflect mirror, press “test” button and make a dot,
your must confirm the dot in the center of mirror; stick a piece of paper on 2
nd
reflect mirror,
press “test” button and make a dot, using adjusting screw of the 1
st
reflect mirror to make
the dot in the in the center of the 2
nd
reflect mirror; stick a piece of paper on 3
rd
reflect
mirror, then move the laser head to left coroner of the machine. Press “test” button and
make a dot. Then move the head to the right corner of the machine to make another dot.
Using adjusting screw of the 2
nd
reflect mirror to make these two dots totally matched
together; stick a piece of paper on 4
th
reflect mirror, then move the laser head to up
coroner of the machine. Press “test” button and make a dot. Then move the head to the
down corner of the machine to make another dot. Using adjusting screw of the 3
rd
reflect
mirror to make these two dots totally matched together.
Move the laser head to the anywhere, Press “test” button to make a dot. Then
move it to another position, make another dot. Make these two dots totally matched
together.
Redsail Tech Co., Ltd
http://www.hflaser.com
