Redsail Laser
3. Installation
1) Install the EASYCUT 2.0 and insert the Dongle (USB key) to run the software.
Dongle (USB KEY)
2) Connect the data cable (232 port) with the computer.
3) Fill the water tank with pure water, place the water pump (aquarium) inside the
water, feel the water outlet and connect left one of the tubes with water pump. (There are
two pipes at the back of the RS3040A, they connect with laser tube to supply water
cooling), 10-20 seconds later, water comes out from right tube. Let the water circulate in
the water tank. The water tank should have at least 10 Liter clear water, and the water
temp should under 20
o
C.
If fail to supply water to laser tube, the laser tube will burn out
quickly!!
Place the pump inside the water
Redsail Tech Co., Ltd
http://www.hflaser.com
