Redsail Laser
ESD.
7) Blower fan must be turned on while working, so as to avoid pollutions on
mirrors and lens. It is forbidden to put any flammable and explosive articles close to the
equipment so as to avoid fire.
8) Any irrelevant total reflection or diffuse reflection objects can not be placed in
the equipment to prevent the laser from reflecting on human body or flammable articles
directly.
9) The water in laser tube should be drawn off in winter, in order to avoid ice
cracking of the tube.
10) When the machine is working, operators should examine the working
conditions (especially the water supply and temperature of circulating water, etc.) at any
moment.
11) The machine should be put in places where there is no interfere and harmful
effect of pollution, strong electricity, strong magnetism, and so on.
12) When the power supply is not stable, please don't start the machine. It is
suggested to use voltage regulator.
13) People who have not been trained should not use the machine.
14) Don't strike the keys and buttons strongly. Please press it lightly to avoid
damages of those keys and buttons.
15) In case there is damage or fire, please turn off the power at once.
16) Don’t start the machine when there is thunder or lightning.
Users should follow all the above mentioned regulations carefully.
Otherwise the manufacturer will not take responsibility for any troubles of the
machine or physical injuries.
2. Maintenance
1) It is forbidden to use circulating water of poor quality, because it may affect the
laser power seriously and shorten the service life of laser tube. The manufacturer is not
responsible for repairs and maintenance of damages of the tube caused by the using of
poor-qualified water. It is suggested to use pure water.
The minimum amount of cooling water should be 10L. Make sure that the water
can submerge the submersible pump.
Redsail Tech Co., Ltd
http://www.hflaser.com
